Need DC++ settings to connect with the Tikona hub

Need DC++ settings to connect with the Tikona hub I am able to connect to the hub and also with this I can only download when I am connected to Tikona internet. Otherwise I am not able to connect. And also recently I have switched off the firewall, I am here to get the configuration setting for the DC++ for connecting with the Tikona hub. I am having following requirements for that and which are as: Connection type (active or passive? ) if active where can we get IP? Connection type (LAN T3/LAN T1/CABLE) ? Any other settings in DC or computer? Reply With Quote #2 Old 14-11-2011 FarhaS FarhaS is offline Member Join Date: May 2011 Posts: 403 Re: Need DC++ settings to connect with the Tikona hub Ok friends, I am having the setting for that and which are as: For that I will suggest you to download the DC++ any version, And then right click My Network Places go to properties> right click on local area connection 2 and go to properties. And then go to the internet protocol click on properties and over there, enter the following details:: IP add 10.6.134.xxx subnet mask 255.255.255.254 default gateway 10.6.134.1 PREF DNS 203.197.12.30 alt DNS 202 .54. 1. 18 and after doing this, you will need to click on advanced> click on DNS button then click on add and then put : 172.31.6.125 172.31.6.5 also you will need to add the hubs in DC++ favorites as: 10.6.106.43:1024 10.6.106.6:1024 and connect And once this hubs are get connected at that time you can also connect many other hubs with this. Reply With Quote #3 Old 14-11-2011 KalaK KalaK is offline Member Join Date: Nov 2011 Posts: 81 Re: Need DC++ settings to connect with the Tikona hub Great steps dude. Thanks for providing the setting for connecting to Tikona hub. I have tried with this setting and there I found that now all things are working very fine. Thanks a lot for such a great setting dude. Reply With Quote #4 Old 15-11-2011 Weslee Weslee is offline Member Join Date: Nov 2011 Posts: 100 Re: Need DC++ settings to connect with the Tikona hub Friend, can you please suggest me the proper steps for this setting. Because I was also trying to get this type of the setting and over here only I get the setting for that. But after trying with this settings also I get that this is also not working fine for me. I am not getting the proper steps for this setting. Please reply me back about this. Reply With Quote #5 Old 24-11-2011 Arnold Nadar Arnold Nadar is offline Member Join Date: Nov 2011 Location: Mumbai Posts: 1 IP add 10.6.134.xxx subnet mask 255.255.255.254 My lan card says the combination is invalid IP add 10.6.134.xxx wht is the last three digit in the ip address Reply With Quote #6 Old 25-11-2011 EINSTEIN_007's Avatar EINSTEIN_007 EINSTEIN_007 is offline Member Join Date: Dec 2007 Posts: 1,998 Re: Need DC++ settings to connect with the Tikona hub Quote: Originally Posted by Arnold Nadar View Post IP add 10.6.134.xxx subnet mask 255.255.255.254 My lan card says the combination is invalid IP add 10.6.134.xxx wht is the last three digit in the ip address Which operating system have you installed in your pc? I think that microsoft intentionally wanted to prevent assignment of public ip adresses to lan adapters (in order to sell win2k servers, domain controllers and ... ??) which is why you are getting that error. __________________